Introduction
The nitrile latex auxiliary material contains the following main raw material components: zinc oxide powder, sulfur powder, accelerator BZ powder, accelerator EZ powder, antioxidant powder, titanium dioxide, dispersant powder and appropriate amount of water. Mix the raw materials After that, stir and disperse, then circulate and grind until the particle size of the powder in the mixed solution is ≤5μm to obtain a mixed nitrile latex. The prepared nitrile latex has accurate raw material ratio, more convenient to use, low production cost and smooth nitrile gloves. High degree of accuracy, high pinhole qualification rate and stable quality. In actual production, due to the particularity of sulfur powder during wet grinding, it is recommended to grind the sulfur powder separately from other powders into a slurry. The sulfur powder is ground with a basket bead mill, while other zinc oxide powders and accelerator BZ powder , Accelerator EZ powder, antioxidant powder, titanium dioxide, dispersant powder are separately ground by bead mill.
Products Details
1)Temperature sensors for inlet and outlet cooling water and for products

2) Special cover for easy operation

3) Manual Clamp, easy to fix the tank

Application
ELE Basket mill for Sulphur solve the problem that sulfur powder is easy to agglomerate in the grinding cavity of the bead mill during wet grinding. The reason: because the sulfur powder has hydrophobic characteristics, it is easy to separate the sulfur powder from water under the high-speed centrifugal action of the bead mill, and the temperature rises quickly and agglomerates, so that the water in the sulfur slurry is discharged and the sulfur powder remains In the grinding cavity of the bead mill, it affects the entry of the sulfur slurry pumped into the grinding cavity, causing the bead mill easy block. Although the speed and flow rate can be adjusted during actual control, it requires high personnel, poor operability, and cannot improve production efficiency. Therefore, the advantages of basket bead mill grinding equipment in nitrile latex accessories are quite obvious.
Data Sheet
| Model | Grinding Basket Volume(L) | Main Motor(KW) | Speed(rpm) | Capacity(L) | Grinding Media(mm) | Lifying Method (mm) | 
| EBM-0.75 | 0.3L | 0.75 | 2885 | 2.5~5 | 0.4~2.6 | Electrical | 
| EBM-1.1 | 0.3L | 1.1 | 2885 | 2.5~8 | 0.4~2.6 | Electrical | 
| EBM-2.2 | 0.8L | 2.2 | 2890 | 15~40 | 0.4~2.6 | Electrical | 
| EBM-4 | 2.1L | 4 | 2950 | 50~100 | 0.4~2.6 | Electrical/ Hydraulic | 
| EBM-7.5 | 4.2L | 7.5 | 1480 | 100~200 | 0.4~2.6 | Hydraulic | 
| EBM-11 | 10L | 11 | 1480 | 200~300 | 0.4~2.6 | Hydraulic | 
| EBM-15 | 10L | 15 | 1480 | 250~350 | 0.4~2.6 | Hydraulic | 
| EBM-18.5 | 16L | 18.5 | 1480 | 350~500 | 0.4~2.6 | Hydraulic | 
| EBM-22 | 16L | 22 | 1480 | 400~600 | 0.4~2.6 | Hydraulic | 
| EBM-30 | 23L | 30 | 1480 | 500~800 | 0.4~2.6 | Hydraulic | 
| EBM-37 | 30L | 37 | 1480 | 600~1000 | 0.4~2.6 | Hydraulic | 
| EBM-45 | 40L | 45 | 1480 | 800~1100 | 0.4~2.6 | Hydraulic | 
| EBM-55 | 55L | 55 | 990 | 1000~1400 | 0.4~2.6 | Hydraulic | 
| EBM-75 | 75L | 75 | 800 | 1500~2000 | 0.4~2.6 | Hydraulic | 
 
Hot Tags: Basket Mill For Sulphur, suppliers, manufacturers, cost, price, for sale


 
      
 
      
      
     
    









